Secure Payment 
International Shipping FX Protect Glass Coating S4-H is a nano-particle ceramic coating described as flexible at the micro-level (micro-shrink and micro-expansion) to help avoid cracking.
Performance & Surface Effect
Delivers strong water repellency, supporting easier washing and a more pleasant maintenance routine.
Protection & Resistance
Stated durability: up to 3 years. Stated heat resistance: up to 426°C (800°F). Chemical resistance is stated as 12> Ph> 2.
Key Features
- Hardness: 4H
- Stated protection period: up to 3 years
- Coating thickness: 1–1.5 μm per layer
- Consumption: 10–15 ml per vehicle per layer
- Heat resistance: up to 426°C (800°F)
- Drying time: 2–8 minutes
- Final curing time: 24 hours
- Chemical resistance: 12> Ph> 2
- 30 ml bottle: stated as sufficient for 2 vehicles (hatchback, sedan, estate, SUV, pickup, van)
Application Recommendations
- Apply 7–9 drops of Glass Coating onto a dry applicator (as stated; once the applicator is saturated, the number of drops may be reduced).
- Spread evenly over the surface.
- Wait 3–7 minutes, then remove excess using a damp microfibre, and finish by buffing to gloss; repeat over all exterior lacquered surfaces.
- Remove excess on time—if left too long, the coating may crystallise and become difficult to remove (as stated).
- Use demineralised water only (as stated).
After Application
After treatment, keep the vehicle in stable conditions and allow the coating to harden. The description specifies ambient temperature should not be lower than 10°C. Curing time can be reduced using infrared radiation (as stated).
Maintenance
The description notes a single application is sufficient, but for maximum effect it recommends applying two layers. It also states the coating may be used on лак, rubber and plastics.
Important Notes / Warnings
- Do not delay wipe-off—late removal can make residue difficult to clear.
- Use only demineralised water (as stated).
There are no reviews yet.