Nano-particle ceramic coating FX Protect Glass Coating S4-H 15ml (K9GXLR-559)

FX Protect Glass Coating S4-H is a nano-particle ceramic coating described as capable of micro-level contraction/expansion to help avoid cracking in use.

Performance & Surface Effect

Provides a pronounced water-repellent effect, intended to reduce dirt adhesion and make routine washing easier.

Protection & Resistance

Stated durability: up to 3 years. Stated heat resistance: up to 426°C (800°F). Chemical resistance is stated as 12> Ph> 2.

Key Features

• Hardness: 4H
• Stated protection period: up to 3 years
• Coating thickness: 1–1.5 μm per layer
• Consumption: 10–15 ml per vehicle per layer
• Heat resistance: up to 426°C (800°F)
• Drying time: 2–8 minutes
• Final curing time: 24 hours
• Chemical resistance: 12> Ph> 2
• 15 ml bottle: stated as sufficient for 1 vehicle (hatchback, sedan, estate, SUV, pickup, van)

Application Recommendations

1. Apply 7–9 drops to a dry applicator (as stated; reduce drops once the applicator is saturated).
2. Spread across the surface evenly.
3. Wait 3–7 minutes, then remove excess with a damp microfibre and buff to gloss across all exterior lacquered panels.
4. Ensure timely wipe-off to prevent crystallisation and difficult residue removal (as stated).
5. Use only demineralised water (as stated).

After Application

Keep the vehicle in stable conditions during curing; the description specifies ambient temperature should not be below 10°C. It also notes curing can be shortened using infrared radiation.

Maintenance

Single application is described as sufficient; for maximum effect, the description recommends two layers. It also states the product may be used on лак, rubber and plastics.

Important Notes / Warnings

• Do not leave the coating too long before wipe-off (risk of crystallisation, as stated).
• Use demineralised water only (as stated).