Ceramic paint protection kit (Liquid Glass) SONAX XTREME Ceramic Lackprotect 240ml (247941)

SONAX XTREME Ceramic Lackprotect is a ceramic “liquid glass” kit designed to protect automotive paintwork by creating a clear protective film. It is intended for new vehicles or vehicles with pre-polished paintwork (solid and metallic paints).

Performance & Surface Effect

Enhances colour and gloss, leaving the paint very smooth. The coating is described as reducing adhesion of dirt, insects and road salt, making washing and maintenance easier.

Protection & Resistance

Stated effect duration: up to 9 months.

Key Features

• Intended for new or pre-polished paintwork (solid and metallic)
• Reduces adhesion of dirt, insects and road salt (as described)
• Enhances colour, gloss and surface smoothness
• Effect duration: up to 9 months

Kit Contents

• Cleaner “REINGER 1” (100 мл)
• Base ceramic sealant with applicator “Basis Versiegelung 2” (75 мл)
• Super-gloss finishing product “Gloss Versiegelung 3” (65 мл)
• Application sponge

Application Recommendations

1. Wash the vehicle thoroughly using plenty of water and shampoo.
2. Remove residual contamination such as insect remains, tree resin or tar.
3. If needed, polish painted surfaces to a mirror finish.
4. Shake “REINGER 1”, spray a thin layer and work in sections (max. 1/2 of the bonnet). Wipe immediately with a clean, dry microfibre cloth.
5. Remove the locking ring under the “Basis Versiegelung 2” applicator. Press the bottle vertically onto the paint for 1–2 seconds to saturate the fleece.
6. Apply the base sealant evenly and thinly. Work areas up to 0.5 m² (e.g., 1/4 of the bonnet) at a time.
7. Allow to dry for 15–30 seconds (depending on ambient temperature). If the fleece dries, press again for 1–2 seconds to add product.
8. Remove excess with a clean, dry microfibre cloth and buff to a streak-free finish.
9. Shake “Gloss Versiegelung 3”. Spray a small amount onto the application sponge (yellow side).
10. Apply to adjacent sections (max. 1/2 of the bonnet) and allow to dry for 1–2 minutes.
11. Wipe streak-free with a clean, dry microfibre cloth. If the colour impression is uneven or dried residues remain, apply and wipe off immediately.

After Application

Do not wash the car for 3 days after applying the ceramic coating.

Important Notes / Warnings

• Use only on painted surfaces.
• Do not use in direct sunlight or on hot paintwork.
• Test compatibility on a small, inconspicuous area first.
• Protect from frost.
• Do not polish the vehicle after application; polishing will remove the product.