Ceramic top coat FX PROTECT Top Coating CH-3, 150ml (FXGFCNT05)

FX PROTECT Top Coating CH-3 is designed to deliver long-lasting protection and gloss, helping protect the bodywork against weather, contamination and UV exposure while keeping the finish in strong condition.

Performance & Surface Effect

Leaves a glossy finish and is positioned to maintain its protective effect for an extended period without frequent re-application.

Protection & Resistance

Highlights high wear resistance and long-term effectiveness.

Key Features

• Long-lasting protection and gloss focus
• High wear resistance positioning
• Easy application using an applicator or soft microfibre
• Application temperature range: from +5°C to +30°C
• 50 мл is stated as sufficient to coat 2–3 medium-size vehicles

Application Recommendations

1. Do not apply CH-3 in direct sunlight or on a hot surface. Optimal application temperature is from +5°C to +30°C.
2. Shake the bottle well before use.
3. Apply a small amount to an applicator or soft microfibre sponge.
4. Spread evenly over the surface in small sections using circular or straight movements.
5. Wipe thoroughly with a soft microfibre towel to remove residue and bring the surface to a clean gloss.
6. Allow the coating to dry on the surface for approximately 1 hour at room temperature.
7. Do not wash the vehicle for 24 hours after application to ensure full drying and polymerisation.

After Application

Allow approximately 1 hour of drying at room temperature and avoid washing for 24 hours.

Important Notes / Warnings

• Do not apply in direct sunlight or on a hot surface.

::contentReference[oaicite:0]{index=0}