Ceramic paint protection coating FX Protect Vision Coating C-12, 30ml (K9GXLR-556)

FX Protect Vision Coating C-12 is a protective ceramic coating positioned as an easy-to-use solution for enthusiasts, with a stated service life of up to 12 months.

Performance & Surface Effect

Designed to leave the finish with a clean, high-gloss look after a simple spray-and-buff process.

Protection & Resistance

Contains components intended to help protect the surface from UV radiation, acid rain, bird droppings and water spots. Stated heat resistance: approximately ~250°C.

Key Features

• Stated durability: up to 12 months
• Helps protect against UV radiation, acid rain, bird droppings and water spots
• High heat resistance: ~250°C
• Panel-by-panel application
• Curing should be carried out at ambient temperature not below 10°C (as stated)

Application Recommendations

1. Shake the product before each use.
2. Spray onto the surface.
3. Wipe with a dry, seamless microfibre towel, then use a fresh microfibre towel to buff to a flawless gloss.
4. Repeat on all exterior painted surfaces.
5. Work panel by panel.
6. Do not over-apply, as excess product may lead to uneven coverage.

After Application

After completing application, leave the vehicle to allow the protective layer to harden. The description specifies ambient temperature should not be lower than 10°C during this period.

Important Notes / Warnings

• Use the product panel by panel.
• Avoid using too much product to prevent uneven results.