Ceramic Coating GYEON Q² Syncro EVO Light Box 30ml (8809432672616)

After two years of intensive research and development, it was time to take the Gyeon coating range to the next level. Thanks to technological advances within the polysilazane chemistry group, Gyeon has managed to almost double durability and significantly simplify the application process. The application and wipe-off window has been greatly extended thanks to the new formulas.

Moreover, all new EVO coatings no longer require a two-layer application — one layer is sufficient — and they can be applied outdoors; a garage is no longer mandatory. The key requirement is to keep the vehicle in a dry place for the next 12 hours and apply the product in the shade.

GYEON Q² Syncro EVO is a professional two-component coating system developed for specialists who are not part of the Gyeon Certified Detailer programme. It is Gyeon’s most innovative coating that is available to everyone — both enthusiasts and professionals. Thanks to the new formula, application is easier, as it now requires only 2 layers instead of 3 or 4.

Q² Syncro EVO delivers maximum colour depth, exceptional smoothness and a strong water-repellent effect.
Q² Mohs EVO (the base component based on fluoropolysilazane) provides strong bonding and long-term protection.
Q² Skin EVO (the silicone top coat) adds flexibility, gloss and self-cleaning ability, helping the car look flawless between washes.

Key Features

• Two-step system: Q² Mohs EVO base + Q² Skin EVO top layer
• Consumption: approx. 30 g per vehicle
• Durability: up to 48 months / over 50,000 km

Kit Contents

• 1 pc GYEON Q² Mohs EVO 30 мл
• 1 pc GYEON Q² Skin 30 мл
• 1 pc GYEON Q²M applicator
• 1 pc GYEON user manual

Application Recommendations

1. Pre-wash and decontaminate with Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay.
2. Polish to gloss using Q²M Polish; use Q² Primer if needed.
3. Wash with a strong degreaser (example given: hot water with dishwashing detergent).
4. Remove residues with Q²M Prep (IPA alone is not sufficient, as stated).
5. Shake and apply a few drops of Q² Mohs EVO onto the applicator.
6. Apply cross-hatch on small sections.
7. After 10–30 seconds, level with Q²M BaldWipe.
8. After completing the base layer, apply Q² Skin the same way.
9. After 1 hour, apply Q²M Cure and wipe with Q²M SoftWipe.

After Application

Avoid contact with water for 24 hours and do not wash with shampoo for 14 days (as stated). Keep the car dry for the next 12 hours after application and apply in shade (as stated).