Ceramic Coating GYEON Q² Pure EVO 50ml (8809432672487)

After two years of intensive research and development, it was time to take the Gyeon coating range to the next level. Thanks to technological advances within the polysilazane chemistry group, Gyeon has managed to almost double durability and significantly simplify the application process. The application and wipe-off window has been greatly extended thanks to the new formulas.

Moreover, all new EVO coatings no longer require a two-layer application — one layer is sufficient — and they can be applied outdoors; a garage is no longer mandatory. The key requirement is to keep the vehicle in a dry place for the next 12 hours and apply the product in the shade.

Q² Pure EVO features the highest silicone content (up to 75%) of all Gyeon coatings, delivering an unmatched “candy” gloss. Thanks to the new formula, the product remains easy to buff off for up to 10 minutes after application, making the process simple and enjoyable.

Q² Pure EVO stands out with a glass-like shine and, in terms of visual effect, competes with high-quality natural waxes. Impressive colour depth and the “lollipop” effect are combined with long-lasting, chemically resistant protection against all kinds of external exposure. The coating is resistant to chemicals in the pH 2 to 11 range, ensuring easy vehicle cleaning.

Key Features

• Silicone content: up to 75% (as stated)
• Wipe-off window: up to 10 minutes after application (as stated)
• pH resistance: 2–11
• Durability: up to 36 months / 40,000 km
• Consumption: approx. 30 g per vehicle

Kit Contents

• 1 pc GYEON Q² Pure EVO 50 мл
• 1 pc GYEON Q²M Cure 100 мл
• 1 pc GYEON Q²M Coating Applicator
• 1 pc GYEON user manual

Application Recommendations

1. Pre-wash and decontaminate: Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay.
2. Polish with Q²M Polish; use Q² Primer if required.
3. Wash with a strong degreaser (as stated example: hot water with dishwashing detergent).
4. Remove residues with Q²M Prep (IPA alone is not sufficient, as stated).
5. Shake; apply a few drops to the applicator and apply cross-hatch on small sections.
6. After 10–30 seconds, level with a fresh Q²M BaldWipe towel.
7. After 1 hour, apply Q²M Cure and wipe with Q²M SoftWipe to help prevent water spots.

After Application

Avoid water for 24 hours and do not wash with shampoo for 14 days (as stated).