Easy-apply ceramic coating CarPro CQuartz UK Edition 3.0, 10ml + 2 napkins (CPCQ3010)

CarPro CQuartz UK 3.0 is an improved formula adapted for harsh climates with significant temperature swings, humidity and challenging weather conditions.

Performance & Surface Effect

Provides a glossy finish with a smooth, slick surface feel and deep shine.

Protection & Resistance

Contains more than 70% silicon dioxide and is described as delivering strong long-term protection with resistance to chemicals, salts and road reagents. Chemical resistance is stated at pH3–14, with resistance to water spotting and mineral deposits. Stated durability: 18–24 months.

Key Features

• SiO2 content: more than 70%
• Durability: 18–24 months
• Chemical resistance: pH3–14
• Resistance to water spots and mineral deposits
• Easy application (as described)
• Usable temperature range: +3°C to +40°C
• Technical data: slide angle 10°
• Technical data: water contact angle 110°
• Application temperature range: +5°C to 40°C

Kit Contents

• CarPro CQuartz UK 3.0 – 10 мл
• Microsuede microfibre for coating application 10×10 cm – 2 pcs

Application Recommendations

1. Work only in good lighting.
2. Wrap a 4-inch microsuede towel around the grey side of the applicator.
3. Shake CQuartz.
4. Open the bottle and apply one line of product onto the applicator.
5. Spread over 0.5 m² per pass.
6. Level immediately after application using lint-free microfibre.
7. Remove all excess residue during levelling.
8. Replace microsuede towels after every two body panels.
9. Apply additional layers at 30-minute intervals; the description recommends 2 layers.
10. Do not apply Reload as a top layer before full polymerisation (stated 60–120 minutes).

After Application

Avoid moisture contact on treated surfaces for at least 8 hours (full polymerisation is stated as 24 hours). Avoid detergents and chemicals for 4 days after application.

Maintenance

• Wash regularly using CarPro Reset shampoo with a microfibre pad or wash mitt.
• Dry using a CarPro drying towel.
• Use CarPro Iron X every 3–4 months to remove metallic contamination.
• Use CarPro Reload every 3–5 months to maintain and refresh the hydrophobic layer.

Important Notes / Warnings

• Do not apply in direct sunlight or on hot surfaces.
• Do not reuse 4-inch microsuede applicators.
• Use protective gloves and respiratory protection.