Easy-apply ceramic coating CarPRO Cquartz Lite 150ml (CPCL150)

CarPro CQuartz Lite is an easy-to-use ceramic coating intended for entry-level users who want many of the benefits associated with CQuartz coatings. “Lite” is based on CQuartz UK Ceramic Coating technology and is positioned between durable waxes and full ceramic coating systems.

Performance & Surface Effect

Offers improved washability, strong hydrophobic behaviour and a cleaner finish in everyday use.

Protection & Resistance

Can be used as a stand-alone ceramic coating with a stated service life of more than 6 months, or as a booster for existing CQuartz coatings. Resistance is stated against insect residues, UV exposure and chemicals in the pH 3–14 range.

Key Features

• Entry-level ceramic coating designed for straightforward application
• Stand-alone service life: more than 6 months
• Can be used as a booster for existing CQuartz coatings
• Chemical resistance: pH 3–14
• Improved washability and strong hydrophobic behaviour
• Can be applied on exterior surfaces including paintwork, plastics, wheels and glass (excluding the windshield), and can be used on matte paint finishes

Application Recommendations

1. Ensure the paint surface is fully clean and free of contamination. Use CarPro Iron X, CarPro Tar X and a clay bar to remove bonded contaminants.
2. Correct the paint to achieve high gloss and extend coating performance.
3. Wipe down using CarPro Eraser.
4. Apply 10–12 drops to a microfibre applicator and spread evenly over a section of approximately 60×60 cm.
5. Use a high-quality microfibre towel to remove residue. Do not leave any unlevelled product on the surface—remove immediately.
6. Check with appropriate lighting to confirm all streaks and residue are removed.
7. If high spots remain, they can be removed within the first minutes after application: re-apply CQuartz Lite to the area and wipe off immediately.
8. Allow at least 4 hours for drying. For the first 48 hours, avoid contact with water; if water contacts the surface, remove it carefully with a microfibre towel.
9. Recommended: apply CarPro Reload 1 hour after applying CQuartz Lite to protect the coating during the first 48 hours from water exposure.

After Application

Allow at least 4 hours for drying. Avoid water contact for the first 48 hours after application.

Important Notes / Warnings

• Use protective gloves.
• Use respiratory protection.